Emplode is giving me a "download failed when checking database" error. I tried downgrading to 2.0 and i also tried rebuilding the database using the directions at http://www.riocar.org/modules.php?op=modload&name=FAQ&file=index&myfaq=yes&id_cat=8&faqent=220#220 but it did not help. What should I try next?





empeg-car bootstrap v1.02 20001106 ([email protected])/12/24.IP 1.0 for NET4.0tarting playerpl
empeg usb
If there is anyone present who wants to upgrade the flash, let them speak now,y.e support initialised 0089/88c1 (save to d0004e00).
! tunedb_d
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
empeg power-pic driver initial
LAC construct 0x405ae008

e000 v1.04 Linux-2.2
Copying kernel...car - 2.1490 Dec
Calling linux kernel...s of 4096K size

Uncompressing Linux..................................... done, booting the kerne-
Probing primary interface...
empeg
hdb: F
l.TS
Linux version 2.2.14-rmk5-np17-empeg54 (rob@tatu) (gcc version 2.95.3 20010315 (L2300AT, ATA DISK drive.
hdb: FUJITSU MHL23
release)) #48 Wed Dec 24 15:41:06 GMT 2003is 206f6972 'ri
ide0 at 0x000-0x007,0x038
Processor: Intel StrongARM-1100 revision 11
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b
Dentry hash table entries: 2048 (order 2, 16k)heck:20k re
hdb:
Buffer cache hash table entries: 16384 (order 4, 64k) < hda5 hda6 > hda2 hda3 hda4000-0x007,0x038 on irq 6
Page cache hash table entries: 4096 (order 2, 16k)hdb4
RAMDIS
POSIX conformance testing by UNIFIX2048kB Cache, CHS=58140/16/63
Linux NET4.0 for Linux 2.2blocks [1 disk] into ram d
Based upon Swansea Universit
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UARTic partition read-o
Signature is 206f6972 'rio ' (1998060
Memory: 15024k/16M
empeg display initialised.reserved, 372k data, 4k in
empeg dsp audio initialised(Dag Brattliystem) readonly
empeg dsp mixer initialised
empeg dsp initialised
D
empeg audio-in initialised, CS4231A revision a0066e000sic partition read
empeg remote control/panel button initialised.mount /dev
Page cache hash table entries: 4096
empeg usb initialised, PDIUSBD12 id 1012y NET3.039
ircomm_tty: vir
empeg state support initialised 0089/88c1 (save to d0004e80).nformance testing by UNIFIXond music partition334
empeg RDS driver initialisedtitiofirst music partition r
empeg power-pic driver initialised (first boot)ockEntry) = 16ayerJITS
Remou
RAM disk driver initialized: 16 RAM disks of 4096K sizer Society NET3
hda: FUJITSU MHL2300AT, ATA DISK drive
Starting player6384 bh
hdb: FUJITSU MHL2300AT, ATA DISK drive (ehash 16384 bhash 16384)pp: 49:size
ide0 at 0x000-0x007,0x038 on irq 6

! memory_

IrDA (t
hda: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/6305ae008
Prolux 4 empeg car - 2.1490
Lin
hdb: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/63
V
empeg-flash driver initialized
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
allocating_buffer_pool.cpp: 49:sizeof(BufferEntry) = 32
allocating_buffer_pool.cpp: 50:sizeof(BlockEntry) = 16
player.cpp : 569:empeg-car 3.00-alpha5 2003/12/24.
! memory_stream.cpp : 42:MemoryStream failed to allocate memory.
! tunedb_disk.cpp : 878:Failed to build database. Bad. 0xc007000e
LAC construct 0x405ae008
Prolux 4 empeg car - 2.1490 Dec 24 2003
Vcb: 0x4066e000