looks like the jumper pin was intermitent. thanks


empeg-car bootstrap v1.02 20001106 ([email protected])M:6144b MAC 00:02:d7:26:09:3
If there is anyone present who wants to upgrade the flash, let them speak now,
hda: hda1 < hda5 > hda2 hda3 hda4
hdstress.cpp 1
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.p

e000 v1.0429): Poll
Copying kernel...
Calling linux kernel...time reached, running e
Uncompressing Linux..................................... done, booting the kerne


hdstress.cpp 189 ( 29): Poll result=0 on fd=5
l.
Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315rive
hdstress.cpp 189 (
(release)) #11 Tue Apr 1 18:49:59 BST 2003
Processor: Intel StrongARM-1100 revision 11pinning down.
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)stress.cpp 189 ( 29): Poll result=0 on fd=5
Dentry hash table entries: 2048 (order 2, 16k)
hda:
Speed checking /dev/hda
Buffer cache hash table entries: 16384 (order 4, 64k)pp 189 ( 29): Poll result=0 on fd=5filesystem fou
Page cache hash table entries: 4096 (order 2, 16k)
Read/write
POSIX conformance testing by UNIFIX[1 disk] into ram disk.
Linux NET4.0 for Linux 2.2
Based upon Swansea Universit29)
Seek test complete: 37.83
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )lt=0 on fd=5
Stressing /dev/hd
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
Stressing /dev/hda: S
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UARTess.cpp 189 ( 29): Poll result=0 on fd=5
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UARTtress.cpp 189 ( 29): Poll result=0 on fd
empeg display initialised.
hdstress.cpp 189 (
empeg dsp audio initialised5
empeg dsp mixer initialisedress.cpp 189 ( 29): Pol
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a03
hdstress.cpp 189 (
empeg remote control/panel button initialised.
Read/write of 8
empeg usb initialised, PDIUSBD12 id 1012
hdstress.cpp 189 ( 29
empeg state support initialised 0089/88c1 (save to d0004100).
Stressing /dev/hda: Spinning down.
empeg RDS driver initialisedcpp 189 ( 29): Poll resu
empeg power-pic driver initialised (first boot)
Stressing /dev/hda: Spinning up.
RAM disk driver initialized: 16 RAM
ide0 at 0x000-0x007,0x038 on irq 6024 (log=0)
hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63
2375
hda: IC=Nzwqmvss04-
hdb: IC25N040ATCS04-0, 38154MB w/1768kB Cache, CHS=4864/255/63
empeg-flash driver initializedDISK drive
smc chip id/revision 0x3349per group
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])
hda: IC
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
player.cpp : 385:empeg-car 2.00 2003/04/01.
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4086d000