I am having problems getting my new 80 gig Toshiba drive to install correctly. (model mk8025gas). I am simply trying to replace my factory 20 gig drive with this new drive.

Applying the upgrade seems to work (pumping partions/ complete) and I immediately open up hyperterminal per the directions.

The drive is recognized (as hda correctly) but further on down the text, it says no primary drive.

The directions say it should start formatting the disk, but I have not seen this happen yet.

Here is the print out of the info on my hyper terminal.................................................................................



If there is anyone present who wants to upgrade the flash, let them speak now,
(it'
No primary har
or forever hold their peace...it seems not. Let fly the Penguins of Linux!seco
bash: e2fsck: command not foundempeg init 0.8

e000 v1.04
Copying kernel...eg:/dev# rw
Calling linux kernel...No secondary ha
Uncompressing Linux..................................... done, booting the kerne
Restart code received
l.
e
Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315
empeg:/dev# rwm
mount: /drive0 not mounted
(release)) #11 Tue Apr 1 18:49:59 BST 2003
Processor: Intel StrongARM-1100 revision 11gs.cpp
mount: /drive0 not mounted
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel C

Buffer cache hash table entries: 16384 (order 4, 64k)



ÿIf there is
empeg:/drive0# ls0x4054d
Page cache hash table entries: 4096 (order 2, 16k)/drive0# ls -a
en
. .. f
POSIX conformance testing by UNIFIXgss
Linux NET4.0 for Linux 2.2
Parallelizi
Based upon Swansea University Computer Society NET3.039


No
empeg:/drive0#
NET4: Linux TCP/IP 1.0 for NET4.0rive0# cd .. read-onlyp1

empeg:/bin# hdstres: 61:
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg:/bin# hdstress
empeg remote control/panel button initialised.
N
Nn
Nn
Ni
Prolux 4 empeg
empeg usb initialised, PDIUSBD12 id 1012ed checking /dev/hda3
empeg state support initialised 0089/88c1 (save to d0005800).
Ni
Nt
Nl
Ne
empeg RDS driver initialised
Read/write of 8Mb too
empeg power-pic driver initialised (first boot)
Remounting
hdstress.cpp 189 ( 6
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDEa: Spinn
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
hdstress.cpp 189 (
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
VFS: Can't find an ext2 filesystem on dev ide0(3,4).
Tried to mount /dev/hda4 as ext2 but got error 22
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
No primary hard disk
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComplùStarti
ng player
player.cpp : 385:empeg-car 2.00 2003/04/01.
! tags.cpp : 61:Failed to open tags (0xc0041002).
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4054d000



I am not using any jumpers on the drive since it is the only drive. I am concerned over this line...

VFS: Can't find an ext2 filesystem on dev ide0(3,4).

as it seems like the one that starts my problems....

can anyone assist me on this issue?

( i have tried deleting all partitions created to start the update fresh, and sure enough all partitions 1-6 are created on the drive, but i still get the no primary drive error...)

Chris