I tried this scanario with both windows 2000 and XP and got the same results. I have arm 1.03 installed and connect rio via ethernet. ARM assign an ip address to the rio. The LCD of the rio show the correct ip information. But I can not access the music. The LCD does not show me the initial screen that I am suppose to see. ARM window show the rio reciever so I assume that it is connected. following is the last few line of logs I got from the ARM.

Hope someone could help me to figure out the problem.

00:02:27.515 NFS Server: Starting...
00:02:27.515 Using image file: C:\Program Files\Audio Receiver\receiver.arf
00:02:27.515 bootp: binding to 192.168.0.2:67
00:02:27.515 Hostname : 192.168.0.2
00:02:27.515 IP : 192.168.0.2
00:02:27.515 Gateway IP : 192.168.0.2
00:02:27.515 Server IP : 192.168.0.2
00:02:27.515 Netmask : 255.255.255.0
00:02:27.531 httpd: binding to 192.168.0.2
00:02:27.531 Binding to 192.168.0.2:12078
00:02:54.531 BOOTP: Got a DHCP discover/request
00:02:54.531 BOOTP: Got matching vendor class ID
00:02:54.531 Trying to find IP address for MAC address 00:90:00:11:27:61
00:02:54.531 Need to find an IP address.
00:02:54.531 Found an unassigned address: 192.168.0.129
00:02:54.546 Assigned IP address 192.168.0.129 to unit with MAC address
00:02:54.593 BOOTP: Got a DHCP discover/request
00:02:54.593 BOOTP: Got matching vendor class ID
00:02:54.593 Trying to find IP address for MAC address 00:90:00:11:27:61
00:02:54.593 The last IP address used was 192.168.0.129
00:02:54.593 This IP address was last used for this MAC. Good.
00:02:54.593 The IP isn't currently in use so just use it
00:02:54.593 Assigned IP address 192.168.0.129 to unit with MAC address