Hi,

Trying to get my Rio Receiver to work over a PowerPlug network.

The two SpeedStreams are communicating fine. I have a hub plugged into one speedstream which is plugged into my Cable Modem and my computer (the one with the server software running). The other speedstream is plugged directly into the Rio. The rio get's it's IP address ok, but it does not "see" the server when it performs it's search. The rio icon does get inserted correctly into the Audio Manager software.

When I unplug the rio from the speedstream and plug it directly into the hub, it works fine. It only seems to have an issue while working through the speedstream.

If I plug my laptop into the other speedstream, I get an internet connection, so I know the link between the two speedstreams is good.

Any ideas?