Ok, let me see if I have this straight. I connected the sled to the iso connector in the dash and got this:

Sled Car

Black (Earth) Earth

White (unlabelled) Illumination

Yellow (Memory) +12v Memory

Green (Tel Mute) NA

Orange (Ign Sense) +12v Ign

Blue (Amp remote) Antenna / Remote

So... it would appear that they line up correctly. I do indeed have a tuner module (from PCA), so I should cut the antenna/remote wire on the iso dash and connect to the blue wire of the tuner?

As for the "P. Con Ignition" this is a connector on the amp itself - so I should connect this to the blue wire on the iso connector that I just cut? Edit ... I mean connect to the space where the blue wire was before I cut it off.

I hope this is all correct Thanks for all your help

Phil