Hi All,

I need a recommendation for a wireless ethernet bridge and I'm thinking since the empeg bbs guys know everything worth knowin', this is the place to ask.

I have an office about three blocks from my house and I plan to use an 803.11g wireless ethernet bridge to connect the two. I already have the yagi antennas I intend to use, but I need the bridges.

I had in the past, before it met the concrete at a high rate of speed, a Stinksys gen 1 WET11, which never functioned properly and was prone to crashing. Linksys tech support was clueless as to how to cure these problems, stating that they never heard of problems with the WET11, even tho several folks have posted to usenet with the exact same problems and have stated they called Stinksys about it, so Linksys is out.

Thinking that Netgear is pretty good, I found the WGE101 which seemed to do everything I want except WPA (WEP only), but does support multiple downstream IP addresses. The WGE111 (game adapter) appeared to be an updated 101 with WPA, and I found no mention of downstream IP adresses, so I took a chance and bought it. It turns out that the antenna is not removable and the "game adapter" supports only one downstream IP address. I suppose I could use another router (no problem) but I need to tap in my yagi antenna.

So, what I would like to find is a stable device like the WET11, wireless g spec, with a removable antenna, that isn't $600. Any suggestions?

Also, anyone know how to get the case off a Panasonic KX-TG4000b? I've removed all the screws and it's still attached somewhere in the middle. I want to add an antenna connector so I can get phone coverage over the three blocks.

Thanks,

Larry