Quote:
When I remove all blue jumpers and test continuity between ground and each pin, I get nothing.


This is a good thing as it indicates no shorts between the rails and ground. I think you might be getting the term "continuity" mixed up with checking for a voltage being present. What they were asking you to do was check the voltage between each pin of the jumper headers and ground. With the jumpers removed, you should get the proper voltage on one pin (to ground) and nothing on the other if that rail is up and running. If there are no shorts, you should get that same reading even with the jumper reinstalled...

JeffreyB


Edited by JeffreyB (29/06/2005 22:40)