Quote:
I would suggest that the current draw from the amps and any other devices you have connected on the blue remote enable line coming out of the sled/empeg is too high. Disconnect the blue wire at the amp/antenna/all the other connected places and see if the empeg comes back.
I think I found the issue, I'm not quite sure how to fix it though. I unplugged the remote line from the new amp and the empeg sprang to life, along with the sub amp. Then I tested the remote line with a multimeter. It was saying that it was at about 9.75volts. I am guessing that there is a short somewhere in the line.
_________________________
---------
//matt