I use my Empeg as my only source in my jeep, and use the tuner and Aux about 50% of the time. When switching source from the menus, the visuals always stay "what they were". In my case, all I want is the plain old clock, as I have no other in my car. I can use the "long press of down" to switch to the Info mode for other info.

I set up irtranslate to use the NextSrc function of hijack, however everytime I switch sources, the visuals start to "rotate". Anyone have any idea how to fix this? I have set my favortie visuals list = clock, but they still rotate...

Certainly I can work around this, by using the menus, but it would be great if I could get nextsrc to work without changing visual behavior.

I see in the Irtranslate page on Mark's site, and example of using the M and T modifiers to make a two-way toggle with a long press, but is there a button code to switch to AUX? I.e. can I do the same thing with all three sources?

Something like:

Left.LA=Main
Left.LM=Tuner
Left.LT=Aux

Perhaps I'm just missing the proper codes for that scheme?

Thanks!
Jeff