Quote:
1. No matter what i do the drive is recognized as hdb. even forcing the master jumper, it still comes up hdb.
2. IRQ error:
hdb: TOSHIBA MK6025GAS, ATA DISK drive0x5411mp v0
empeg single channel IDE
hdb: TOSHIBA MK6025GAS, ATA DISK drive
hdb: TOSHIBA MK6025GAS, ATA DISK drive
hdb: TOSHIBA MK6025GAS, ATA DISK drive
hdb: TOSHIBA MK6025GAS, ATA DISK drive


Is this the only drive connected?

If so, then:

(1) the jumper is wrong (despite your efforts). Usually, no jumper is installed/required for a master (hda) drive.

Or (2) the cable/connectors are defective, resulting in the master/slave bit not being seen by the empeg. Highly unlikely here.

Or (3) Toshiba drives are weird. (dunno)

???


Edited by mlord (19/02/2007 02:32)