Try the following:

- Make sure you are running version 2.00 final of Emplode on your PC (not 2.10)

- Make sure you are running version 2.0 final, 2.0b13, or 2.01 of the player firmware on your empeg. If your disk is bigger than 40-60 megs, make sure it is the bigdisk version from http://rtr.ca/bigdisk/ .

- If you had to change either of the two things above, see if that fixes it. If not, then move on to:

- Go through each of these bullet points very carefully.

Let us know how you fare.