Cannot Exit Player Mode in Hyperterminal | Technical / Troubleshooting

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » Cannot Exit Player Mode in Hyperterminal

Topic Options

#308623 - 27/03/2008 14:10 Re: Cannot Exit Player Mode in Hyperterminal [Re: Roger]
Gleep member Registered: 09/03/2003 Posts: 121 Loc: Iowa	Originally Posted By: Roger Originally Posted By: Gleep Here is my boot capture. I've tried Cntrl+C, Q, and Cntrl-Break Sometimes this is because you've not got your serial connection configured correctly. In particular, check the flow control settings. It's all in the FAQ. Failing that, ditch Hyperterminal: use TeraTerm (on Windows) or minicom (on Linux, etc.) instead. I had a working Hyperterminal config on my pc that crashed the week before so I am having to start over on all my Empeg stuff for the PC. I used the settings from the FAQ, but I will try TeraTerm when I get home tonight. Thanks!
Top

Entire topic
Subject	Posted by	Posted
Cannot Exit Player Mode in Hyperterminal	Gleep	27/03/2008 11:50
Re: Cannot Exit Player Mode in Hyperterminal	Roger	27/03/2008 13:14
Re: Cannot Exit Player Mode in Hyperterminal	Gleep	27/03/2008 14:10
Re: Cannot Exit Player Mode in Hyperterminal	wfaulk	27/03/2008 14:32
Re: Cannot Exit Player Mode in Hyperterminal	Gleep	28/03/2008 02:19
Re: Cannot Exit Player Mode in Hyperterminal	wfaulk	28/03/2008 02:39
Re: Cannot Exit Player Mode in Hyperterminal	Gleep	28/03/2008 11:06
Re: Cannot Exit Player Mode in Hyperterminal	Gleep	31/03/2008 20:53