[Scratching head] how do you move certain files i.e. timed into certain areas. I can upload kernel but have great difficulty w/o a step by step guide to moving files to areas on the empeg. Please help!

Is Tony vacationing or something?!

Let's assume you work from Windows.

- (Since you can load kernels, your serial connection is obviously wokring)
- Load development kernel
- Make Hyperterm connection for empeg; specify direct to COMn (whichever you use), 115200 bps, 8 data bits, 1 stop bit, no parity, no handshaking (flow control); optionally specify that the terminal is ANSI, backspace key sends ctrl-h, arrow keys send terminal sequences. (Everything is there in Hyperterminal menus, just hunt arround a bit.)
- While empeg is playing press ctrl-c; this should stop the player and get you a shell prompt (something like 'empeg:/empeg/bin#').
- Type 'rw;rwm' (without quotes, but with semicolon); this will take a minute or two, and perhaps you will get warnings about mounting unchecked fs; ignore them.
- When the prompt returns, go to target directory (hint: cd works like in DOS, except that delimiters are '/', rather than '\'; cd alone returns you to home directory, rather than printing the current one; use pwd instead; use ls -al in place of dir).
- Type rz; a cryptic line will be printed; ignore it.
- From Hyperterm transfer menu send the file you want (chose Zmodem as protocol - it should be the default).
- Repeate the last three steps as necessary.
- Type 'ro;rom;exit' (again no qoutes, but with semicolons); this should restrt the player.

HTH


Dragi "Bonzi" Raos
Zagreb, Croatia
Q#5196, MkII#80000376, 18GB green