This particular empeg has developed a sporadic "no hdd found" behavior, and I'm having trouble figuring out what it may be. It fails about 80-90% of the time, but I've been thrown off several times already during troubleshooting when it mysteriously started working for several power cycles, only to fail when I closed the lid up and assumed it was fixed.

Here's the troubleshooting I have tried so far:

- noted IDE cable did not appear to be crimped properly. Crimped it down with some clamps.
- tried IDE cable from another known working empeg.
- tried entire HDD Tray from another known working empeg. This seemed to work but after I moved the unit, it stopped working.
- ran diags on the drives from the bad unit and they both passed advanced tests.
- I looked at the IDE header, and it *looks* OK from what I can tell. Nothing like the pictures in the FAQ of bad headers.

I'm attaching the boot log from the latest failure to boot up. Any insight would be appreciated!