Hi.

This is based purely on my (not even remotely perfect) memory and the things I picked up on this board:
All kenwood remotes use either very similar or the same codes for their common functions (like play, stop, volume up, volume down etc.). The rio branded remote for the empeg uses different codes though. So what is most likely to happen?
a) Your rio-branded remote will probably not influence the kenwood head unit
b) The Kenwood remote will probably influence the empeg.
There is a way around (b) though: Install a kernel with the IR mapping hack, and map the kenwood remote command to nothing. That way, the empeg will ignore the kenwood remote and the kenwood will ignore the rio remote, just like it should be in a mixed kenwood/empeg setup.
I would really like an option in emplode though that allows to disable certain remotes.

cu,
sven

proud MkII owner (12GB blue/green/smoked, was #080000113 is #090001010)
_________________________
proud owner of MkII 40GB & MkIIa 60GB both lit by God and HiJacked by Lord