Hello Guys,

I have the problem again and I now have dump the Boot-up messages from the Mark II Player... It looks like the Hard-drives are not being found upon boot up.


Boot - File Starts here: Ingnore DHCP info below it was not attached to a network.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

empeg-car bootstrap v1.00 20000601 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerne
l.
Linux version 2.2.14-rmk5-np17-empeg49 ([email protected]) (gcc versi
on 2.95.3 20010315 (release)) #127 Wed Oct 17 16:02:35 BST 2001
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 7, serial number 80000457)
Command line: mem=12m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 10968k/12M available (964k code, 20k reserved, 332k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 67706d65 'empg'
Scheduling custom logo.
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0004080).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: IBM-DJSA-232, ATA DISK drive
hda: IBM-DJSA-232, ATA DISK drive
hda: IBM-DJSA-232, ATA DISK drive
hda: IBM-DJSA-232, ATA DISK drive
hda: IBM-DJSA-232, ATA DISK drive
hda: IBM-DJSA-232, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: IBM-DJSA-232, 30520MB w/1874kB Cache, CHS=62010/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:10:01:c
9
Partition check:
hda: [PTBL] [4134/240/63] hda1 < hda5 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...ԥjչѕroot (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initI see this is a developer image!
Mounting proc
Mounting first music partition
VFS: Can't find an ext2 filesystem on dev ide0(3,4).
Tried to mount /dev/hda4 but got error 22
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
No primary hard disk
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComplStarti
ng player
empeg-car 2.00-beta3 2001/10/17.
E !! tags.cpp 61: Failed to open tags (0xc0041002).
Rebuild 0ms
3c15be7c DHCP name = lo
3c15be7c DHCP index = 1
3c15be7c DHCP flags = 0x8
3c15be7c DHCP addr = 0.0.0.0
3c15be7c DHCP bcast = 0.0.0.0
3c15be7c DHCP mask = 0.0.0.0
3c15be7c DHCP name = eth0
3c15be7c DHCP index = 2
3c15be7c DHCP flags = 0x1002
3c15be7c DHCP addr = 0.0.0.0
3c15be7c DHCP bcast = 0.0.0.0
3c15be7c DHCP mask = 0.0.0.0
3c15be7c DHCP Our mac is 00:02:d7:10:01:c9
3c15be7c DHCP Current IP address is 0.0.0.0
3c15be7c DHCP Broadcast address is 0.0.0.0
3c15be7c DHCP Attempting to open Autonet socket for eth0
3c15be7c DHCP Adding interface eth0
3c15be7c DHCP Sending DHCP discover (eth0)
3c15be7c DHCP Extensions present: 61 53 55 57
3c15be7c DHCP Testing Autonet address 169.254.199.231
Prolux 4 empeg car - 1.1090 Oct 17 2001
Vcb: 0x405ae000
3c15be7d DHCP Sending DHCP discover (eth0)
3c15be7d DHCP Extensions present: 61 53 55 57
E !! local_audio_component.cpp 543: Invalid tune information for FID 0x0. This i
s bad.
3c15be7e DHCP Sending DHCP discover (eth0)
3c15be7e DHCP Extensions present: 61 53 55 57
3c15be7f DHCP Sending DHCP discover (eth0)
3c15be7f DHCP Extensions present: 61 53 55 57
3c15be80 DHCP Sending DHCP discover (eth0)
3c15be80 DHCP Extensions present: 61 53 55 57
3c15be81 DHCP Sending DHCP discover (eth0)
3c15be81 DHCP Extensions present: 61 53 55 57
3c15be82 DHCP Sending DHCP discover (eth0)
3c15be82 DHCP Extensions present: 61 53 55 57
3c15be83 DHCP Sending DHCP discover (eth0)
3c15be83 DHCP Extensions present: 61 53 55 57
3c15be83 DHCP Testing Autonet address 169.254.199.231
3c15be84 DHCP Sending DHCP discover (eth0)
3c15be84 DHCP Extensions present: 61 53 55 57
3c15be85 DHCP Sending DHCP discover (eth0)
3c15be85 DHCP Extensions present: 61 53 55 57
3c15be86 DHCP Sending DHCP discover (eth0)
3c15be86 DHCP Extensions present: 61 53 55 57
3c15be87 DHCP Sending DHCP discover (eth0)
3c15be87 DHCP Extensions present: 61 53 55 57
_________________________
Blk Infiniti I-30, 1 OVR 0 MkII Serial # 080000457, 120gigs +2000 Music Cd's [Listing avail]