In reply to:

---

Yeah... If you haven't implemented it yet...

A "shift" function for the wired control. For instance, if the control has, say, five buttons, that's only five things you can do. But if one of the buttons becomes a "shift", then that makes it eight functions instead of five. This would take a lot of work in the firmware, probably, though, so it's just a suggestion.

---

Written a bit as I said, phone mute & menu navigation (not finalised yet).

I agree, but I'm strapped to the existing control in my car that has four movements (only one at a time). I could add more external switches, but that'a require another hand to operate. Ideally, a control that has four axis's and a push in direction (like a modified stalk i.e. head lights flash PULL, indicators UP/DOWN & main beam PUSH + horn IN, but non-latching). I guess someone must make one?

Still, I've worked out a way to control the menu with my four direction stick. Just need the UP & DOWN buttons emulated ASCII commands added to the Empeg. The menu is entered by a waggle of the stick either up,down,up & down or the other way around quickly. Then the Empeg will function via the stick as if it was being controlled via the buttons.

Any other ideas?

Regards,


_________________________________________
John, (S/No 0114, 20G).