empeg-car bootstrap v1.02 20001106 ([email protected])

If there is anyone present who wants to upgrade the flash, let them speak now,

or forever hold their peace...it seems not. Let fly the Penguins of Linux!



e000 v1.04

Copying kernel...

Calling linux kernel...

Uncompressing Linux..................................... done, booting the kerne

l.

Linux version 2.2.14-rmk5-np17-empeg50 ([email protected]) (gcc versi

on 2.95.3 20010315 (release)) #5 Sat Dec 22 10:18:24 GMT 2001

Processor: Intel StrongARM-1100 revision 11

NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.

empeg-car player (hardware revision 9, serial number 40104298)

Command line: mem=16m

Calibrating delay loop... 207.67 BogoMIPS

Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)

Dentry hash table entries: 2048 (order 2, 16k)

Buffer cache hash table entries: 16384 (order 4, 64k)

Page cache hash table entries: 4096 (order 2, 16k)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.2

Based upon Swansea University Computer Society NET3.039

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

TCP: Hash tables configured (ehash 16384 bhash 16384)

IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)

Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )

ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )

Starting kswapd v 1.5

SA1100 serial driver version 4.27 with no serial options enabled

ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART

ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART

ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART

Signature is 67706d65 'empg'

Scheduling custom logo.

empeg display initialised.

empeg dsp audio initialised

empeg dsp mixer initialised

empeg dsp initialised

Could not find CS4231A (version=80)

empeg remote control/panel button initialised.

empeg usb initialised, PDIUSBD12 id 1012

empeg state support initialised 0089/88c1 (save to d0004600).

empeg RDS driver initialised

empeg power-pic driver initialised (first boot)

RAM disk driver initialized:  16 RAM disks of 4096K size

empeg single channel IDE

Probing primary interface...

hda: FUJITSU MHM2100AT, ATA DISK drive

hda: FUJITSU MHM2100AT, ATA DISK drive

hda: FUJITSU MHM2100AT, ATA DISK drive

hda: FUJITSU MHM2100AT, ATA DISK drive

hda: FUJITSU MHM2100AT, ATA DISK drive

hda: FUJITSU MHM2100AT, ATA DISK drive

ide0 at 0x000-0x007,0x038 on irq 6

hda: FUJITSU MHM2100AT, 9590MB w/2048kB Cache, CHS=19485/16/63

empeg-flash driver initialized

smc chip id/revision 0x3349

smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])



SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:28:10:c

a

Partition check:

 hda: hda1 < hda5 hda6 > hda2 hda3 hda4

RAMDISK: ext2 filesystem found at block 0

RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.

VFS: Mounted root (ext2 filesystem).

empeg-pump v0.03 (19980601)

Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.

change_root: old root has d_count  player.cpp        : 550:empeg-car 2.00-beta7

(internal) 2001/12/22.