Boy, I sure do like them ``Flying Burrito Bothers"

D'OH!

The CDDB lookup said "Bros" which bugged me, but I made it *worse*. Not to worry. TagStudio cures all!

Yes, as you can probably tell from pic #1, that trim ring protrudes a bit much. I am going to hack about 1/3 of the thickness off the back. The catch is that it has a very slight bevel, and if I take too much off, it may not hide the sled flanges as well as I'd like. More pics to follow.

In the revelations department, the pocket is made by "American International". Don't know the kit number, but all the pieces have "XXX 750" stamped on them (where XXX is some alpha code).

I pulled my one (newer) spare sled out to use while I hack some of the pocket plastic and realized the following: A) yes, it *is* plain steel (my fridge magnet sticks to it) and B) I got one of the defective jobbers without a rolled top lip!!

No big deal, I will reserve this non-stainless, unlipped specimen for my Next-Generation, Loren-Beater, Very-Glossy, Rack-Mount, More-Sophisticated-Than-Is-Truly-Useful Empeg Box!

(Uh, anybody ever written an SNMP agent that reports invalid MP3 files????)

Jim