when i took off the fascia to change my face plate the first time about two months ago all of the screws came out just fine except for one. the bottom left screw kept unscrewing and unscrewing yet not coming out. i finally realized that it was just unscrewing the screw holder attached to the display board and once i figured this out i was able to get it off somewhat successfully. i then separated the screw from the screw holder with a needle nosed pliers pair and screwed the holder back in. i put the new face plate in and screwd it all back together. today my smoke lens came in (much thanks) and i proceeded to take the front off again. same problem. see attached, the circles circle the important bits.