Here is a schematic of the S/PDIF board. This is the best I could come up with given the tools I have to work with, but it is an accurate representation of the board as it is currently setup. I was unsure about a lot of the settings on the chip, so if any stick out as incorrect for the consumer S/PDIF format let me know. All jumper settings are indicated by the red elipses.

Thanks for everyone's help.

Stu

Please disregard the schematic attached to this message. It has a minor error on the Pin 1 label which should read "COPY/C" not "CDOUT". Here is a link to the proper schematic.