Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#127450 - 21/11/2002 20:07 Stuck at "Working" on Jemplode - (I Posted Log)
DirtyDozen
stranger

Registered: 21/11/2002
Posts: 45
Loc: ... they call us Massholes
After uploading new files to player, it froze, but I thought nothing of it. All file's were succesfully done.

I just tried to open Jemplode, and it got, up-to filling all the "rogress bars", and does nothing...

I found stated error's, except dont know what they meen:

empeg-car bootstrap v1.02 20001106 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerne
l.
Linux version 2.2.14-rmk5-np17-empeg51 (mac@aphex) (gcc version 2.95.3 20010315
(release)) #16 Wed Jul 24 18:19:54 BST 2002
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 40104276)
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 00002440 '@$'
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005000).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: FUJITSU MHM2100AT, ATA DISK drive
hda: FUJITSU MHM2100AT, ATA DISK drive
hda: FUJITSU MHM2100AT, ATA DISK drive
hda: FUJITSU MHM2100AT, ATA DISK drive
hda: FUJITSU MHM2100AT, ATA DISK drive
hda: FUJITSU MHM2100AT, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: FUJITSU MHM2100AT, 9590MB w/2048kB Cache, CHS=19485/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:28:10:b
4
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting
player
player.cpp : 385:empeg-car 2.00-beta13 2002/07/24.
Prolux 4 empeg car - 2.1434 Jul 24 2002
Vcb: 0x4086d000



????THANK'S????
_________________________
(... regards to all.) [orange]- DirtyDozen[/orange]

Top
#127451 - 22/11/2002 05:39 Re: Stuck at "Working" on Jemplode - (I Posted Log [Re: DirtyDozen]
mschrag
pooh-bah

Registered: 09/09/2000
Posts: 2303
Loc: Richmond, VA
I don't see any errors on the Empeg side (those look like normal startup messages). What version of jEmplode are you using (says in the title bar)?

Top
#127452 - 22/11/2002 12:34 Re: Stuck at "Working" on Jemplode - (I Posted Log [Re: mschrag]
DirtyDozen
stranger

Registered: 21/11/2002
Posts: 45
Loc: ... they call us Massholes
Version 44

Thank's,
- DirtyDozen
_________________________
(... regards to all.) [orange]- DirtyDozen[/orange]

Top
#127453 - 22/11/2002 12:36 Re: Stuck at "Working" on Jemplode - (I Posted Log [Re: mschrag]
DirtyDozen
stranger

Registered: 21/11/2002
Posts: 45
Loc: ... they call us Massholes
(Taken from above) This is normal?:

Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
_________________________
(... regards to all.) [orange]- DirtyDozen[/orange]

Top
#127454 - 22/11/2002 13:37 Re: Stuck at "Working" on Jemplode - (I Posted Log [Re: DirtyDozen]
mtempsch
pooh-bah

Registered: 02/06/2000
Posts: 1996
Loc: Gothenburg, Sweden
If it's a one drive unit, then yes.

/dev/hda4 is the first (only on a single drive) music partition. For some reason I don't recall, they first try to mount it as a Reiser-filesystem (which it isn't, it's ext2), then it does get mounted as ext2.

/dev/hdc4 is the second music partition - only present on 2 drive units. So on a 1 drive unit it can't be found, hence the error.
_________________________
/Michael

Top
#127455 - 22/11/2002 13:55 Re: Stuck at "Working" on Jemplode - (I Posted Log [Re: DirtyDozen]
mschrag
pooh-bah

Registered: 09/09/2000
Posts: 2303
Loc: Richmond, VA
Oh .. didn't notice that my bad..

Top
#127456 - 25/11/2002 05:06 Re: Stuck at "Working" on Jemplode - (I Posted Log [Re: mtempsch]
Roger
carpal tunnel

Registered: 18/01/2000
Posts: 5683
Loc: London, UK
For some reason I don't recall

Because on the Rio Central, it is ReiserFS.
_________________________
-- roger

Top