Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#136214 - 21/01/2003 11:08 Center screw on Empge Sled (ground screw)
oxymoron822
new poster

Registered: 22/01/2002
Posts: 18
Loc: Maine, USA
I would like to use the pre drilled hole on the back of the empeg sled for my ground point, does anyone know what size screw and washer this takes?

Top
#136215 - 21/01/2003 11:33 Re: Center screw on Empge Sled (ground screw) [Re: oxymoron822]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31594
Loc: Seattle, WA
This was in another thread recently, I don't have the link handy...

I remember having a heck of a time finding a screw to fit that thred. Reason: It's a metric thread. If you live in the US, you might not have the screw lying around. I happened to find one in my garage after quite a long search.

My feeling for matching screws is: Go to the hardware store with the thing *in hand* that you need to match and start going through their bins.

For some reason, the name "M4" sticks in my mind. Does anyone know if it's an M4 screw?
_________________________
Tony Fabris

Top
#136216 - 21/01/2003 12:06 Re: Center screw on Empge Sled (ground screw) [Re: tfabris]
loren
carpal tunnel

Registered: 23/08/2000
Posts: 3826
Loc: SLC, UT, USA
here is the thread about it... one of them at least. it is an M4 (4mm) hole.
_________________________
|| loren ||

Top
#136217 - 21/01/2003 14:43 Re: Center screw on Empge Sled (ground screw) [Re: tfabris]
jimhogan
carpal tunnel

Registered: 06/10/1999
Posts: 2591
Loc: Seattle, WA, U.S.A.
This was in another thread recently

Groan.
_________________________
Jim


'Tis the exceptional fellow who lies awake at night thinking of his successes.

Top
#136218 - 21/01/2003 14:53 Re: Center screw on Empge Sled (ground screw) [Re: loren]
jimhogan
carpal tunnel

Registered: 06/10/1999
Posts: 2591
Loc: Seattle, WA, U.S.A.
here is the thread about it

Et tu, Loren??

(actually, awful puns notwithstanding, I won't complain. This topic just solved a minor problem. I wanted to get some metric thumbscrews to make a new Kenwood ham radio into a quasi-quick-release, but couldn't be sure what size they were. Light dawns: unscrew Kenwood screw, thread into back of Empeg sled. Voila! 4mm)
_________________________
Jim


'Tis the exceptional fellow who lies awake at night thinking of his successes.

Top