New to empeg, need some help. | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » New to empeg, need some help.

Page 2 of 2

2

Topic Options

#231257 - 23/08/2004 19:32 Re: New to empeg, need some help. [Re: meth222]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31600 Loc: Seattle, WA	Quote: First of all, the USB connection is very shaky. Like Rob said, that might simply be the wrong USB driver. The exact issue with the USB driver is described in more detail here. Please have a peek at that and see if that's your problem with the USB connection. Also, I agree with the question about the software version... We forgot to ask if you were using 2.0 on both the player and on the PC. Please check that. Both the player and Emplode need to be running version 2.0 final. Although I applaud your persistence in trying to get ethernet to work. Once you get it working, it's the best way to connect to the player because you can do some very cool things with it. Also... Do you have a proper serial cable? Perhaps you can temporarily abandon USB and use the serial cable to configure the player and re-install the player software version 2.0. Maybe that's all it needs to get ethernet working? _________________________ Tony Fabris
Top

#231258 - 23/08/2004 20:08 Re: New to empeg, need some help. [Re: SE_Sport_Driver]
meth222 new poster Registered: 21/08/2004 Posts: 18	Quote: I didn't see this covered yet (unless I skimmed over it), but are you using version 2.00final for both emplode AND on the car player? Yes I am.
Top

#231259 - 23/08/2004 20:09 Re: New to empeg, need some help. [Re: Phoenix42]
meth222 new poster Registered: 21/08/2004 Posts: 18	Quote: If you let us know where you are maybe some one can drop over and provide you with a more direct helping hand. Bloomington, Indiana. But if anything, I'll drop over someone else's place to get it working.
Top

#231260 - 23/08/2004 20:58 Re: New to empeg, need some help. [Re: meth222]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31600 Loc: Seattle, WA	Quote: Yes I am. And did you hand-install the USB driver as described in the 2.0-final release notes? _________________________ Tony Fabris
Top

#231261 - 24/08/2004 05:39 Re: New to empeg, need some help. [Re: tfabris]
LTJBukem enthusiast Registered: 18/07/2001 Posts: 299	Is the Router pushing IP addresses ? (DHCP). Can you go in via USB and set the empeg to automatically get an IP Address ? Then use network broadcast within Emplode to pick up the player. _________________________ LTJ
Top

Page 2 of 2

2

View All Topics