Red LED near the Strongarm | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » Red LED near the Strongarm

Topic Options

#292616 - 22/01/2007 19:38 Red LED near the Strongarm
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Does anyone know what the red LED near to the Strongarm indicates? If it doesn't light there is obviously something wrong but what exactly, assuming the processor is getting power? Thanks, Stu _________________________ If you want it to break, buy Sony!
Top

#292617 - 22/01/2007 21:38 Re: Red LED near the Strongarm [Re: maczrool]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14484 Loc: Canada	Quote: Does anyone know what the red LED near to the Strongarm indicates? If it doesn't light there is obviously something wrong but what exactly, assuming the processor is getting power? Thanks, Stu I believe it has something to do with the IR transmitter in the empeg (not used). That LED is driven from the output of one of the LXV04 inverter chips, and the corresponding input to that inverter is driven by GPIO-23 from the StrongArm. To verify this, I just hacked Hijack on a player here, and had it blink the LED (GPIO-23) on and off five times at boot -- worked like a charm. So.. the LED serves as an indication that the software was able to boot up and initialize the GPIO ports. -ml
Top

#292618 - 23/01/2007 01:41 Re: Red LED near the Strongarm [Re: mlord]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Cool! Thanks for the explanation. Stu _________________________ If you want it to break, buy Sony!
Top

View All Topics