Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » Replacement SSD?
Register User    Forum List        Who's Online     Calendar     Active Topics    FAQ
Page 4 of 4 < 1 2 3 4
Topic Options
#372019 - 25/05/2019 23:14 Re: Replacement SSD? [Re: mlord]
JBjorgen
carpal tunnel

Registered: 19/01/2002
Posts: 3584
Loc: Columbus, OH
Still no love. Played music and everything, just didn't survive a power cycle.

Code:
empeg-car bootstrap v1.02 20001106 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux...................................... done, booting the kern
el.
Linux version 2.2.17-rmk5-np17-empeg55-hijack-v524 ([email protected]) (gcc version
2.95.3 20010315 (release)) #7 Sat May 25 07:54:55 EDT 2019
Processor: Intel StrongARM-1100 revision 11
Checking for extra DRAM:
c1000000: wrote ffffffff, read e28cc001
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 10101536) 16MB DRAM
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 14992k/16M available (1000k code, 20k reserved, 368k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 206f6972 'rio '
Tuner: loopback=0, ID=-1
show_message("Hijack v524+ by Mark Lord")
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005600).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized:  16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
hda: SINTECHI HighSpeed SD to CF Adapter V1., [sdcard remap 0->1] ATA DISK drive

ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
hda: SINTECHI HighSpeed SD to CF Adapter V1., [sdcard remap 0->1] ATA DISK drive

ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
hda: SINTECHI HighSpeed SD to CF Adapter V1., [sdcard remap 0->1] ATA DISK drive

ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
hda: SINTECHI HighSpeed SD to CF Adapter V1., [sdcard remap 0->1] ATA DISK drive

ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
hda: SINTECHI HighSpeed SD to CF Adapter V1., [sdcard remap 0->1] ATA DISK drive

ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
hda: SINTECHI HighSpeed SD to CF Adapter V1., [sdcard remap 0->1] ATA DISK drive

ide0 at 0x000-0x007,0x038 on irq 6
hda: SINTECHI HighSpeed SD to CF Adapter V1., 29664MB w/8kB Cache, CHS=60269/16/
63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:22:06:0
0
Partition check:
 hda: unknown partition table
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...attempt to access beyond end of device
03:05: rw=0, want=2, limit=0
dev 03:05 blksize=1024 blocknr=1 sector=2 size=1024 count=1
EXT2-fs: unable to read superblock
Kernel panic: VFS: Unable to mount root fs on 03:05
_________________________
~ John

Top
#372020 - 25/05/2019 23:20 Re: Replacement SSD? [Re: Roger]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14496
Loc: Canada
Mmmm.. I don't see the message indicating that the kernel detected the SINTECHI reader. I can force it on.. gimme a sec.

Blind. As. A. Bat.
I guess I'll have a better look at it either at The Meet, or after The Meet.

Cheers.


Edited by mlord (25/05/2019 23:23)
Top
#372021 - 26/05/2019 00:41 Re: Replacement SSD? [Re: Roger]
JBjorgen
carpal tunnel

Registered: 19/01/2002
Posts: 3584
Loc: Columbus, OH
Sounds good. Thanks!
_________________________
~ John

Top
#372045 - 07/06/2019 20:29 Re: Replacement SSD? [Re: mlord]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14496
Loc: Canada
Originally Posted By: mlord
.. the SINTECHI reader ..
I guess I'll have a better look at it either at The Meet, or after The Meet.


Roger was kind enough to pick up a SINTECHI adapter for me in the UK, and I have been playing with it here for an hour or so now.

It seems to behave just fine with a 4GB SD-Card, and with a 16GB SD-Card, but not with the 64GB card here. I don't have anything in between 16 and 64GB to try it on, but I suspect some kind of capacity limitation.

EDIT: The onboard chip is labelled as FC1307, but also has a letter A literally scratched onto the surface after the FC1307 part. So it is either a FC1307A, or a counterfeit of some sort.

If anyone at the Meet has a 32GB card for me to try, I'll report back on that later as well.

Cheers


Edited by mlord (07/06/2019 21:01)
Top
#372048 - 08/06/2019 03:33 Re: Replacement SSD? [Re: Roger]
JBjorgen
carpal tunnel

Registered: 19/01/2002
Posts: 3584
Loc: Columbus, OH
Can't be a size limitation because it failed to survive a reboot with a 1gb card that I built. It must be some other factor. That said, if I can get a confirmed card that it works with, I'm happy to pick up a different card.
_________________________
~ John

Top
#372049 - 08/06/2019 07:21 Re: Replacement SSD? [Re: Roger]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14496
Loc: Canada
The chip on mine is marketed as a SD-CF adapter, so pretty much the same kind of thing that might be found in some of the various SD-CF-Card adapters also found on Amazon. There's another chip that also is/was pretty common on these, as can be seen in some of the product photos on A.

Which chip did you get?

Top
#372053 - 09/06/2019 00:43 Re: Replacement SSD? [Re: Roger]
JBjorgen
carpal tunnel

Registered: 19/01/2002
Posts: 3584
Loc: Columbus, OH
It's at the office, I'll have to wait until Monday to check.
_________________________
~ John

Top
Page 4 of 4 < 1 2 3 4

Privacy statement · Board Rules · Mark all read
Contact Us · empegbbs.com · Top