I was trying to configure the equalizer to setup my stereo system.
I use a Spectrum analyzer program on my laptop.
First I decided to connect the output of the empeg directly to the input of the Laptop to see the behavior of the equalizer.
The test signal was a swap frequency from 20 to 20k Hz generated by =Cool Edit and stored as wav into the empeg.
Good thing is that the frequency response is very flat without equalization.
The equalizer works very well en is very precise ,but some times acts in a strange way .

I set the lock as left=right.
On band 5 -5db 700Hz q 0.04.
All the other bands on FLAT.

The two channels should sound the same but the graph shows a big difference.
The Right channel works perfectly , but the left don’t. (see attached jpg)

It seems to me that there is some kind of bug somewhere in the Equalizer applications.

Did some of yours had the same kind of experience?

P.S.
I have a EMPEG 2a 10 gig, running 2.00beta11 and hijack 220.