I'm having a strange problem with an empeg. I put it in the car and it started skipping forward, fast-forwarding, etc. I switched it off but it kept turning back on- I finally pulled it. I figured I had over-tightened the facia, so I backed off the front screws a bit and plugged it in at my desk. I streamed from it all day and it didn't go nuts, but when I brought it home and tested it the craziness started up again. I pulled the front face and buttons to eliminate button seating issues, but it's intermittantly possesed. And the right/fast fwd button has now stopped working altogether. I found the thread on the /proc/empeg but the missed interrupts are low (6-12 in an hour) and consistent with my non-crazy backup empeg. I'm thinking that the right switch is faulty at this point, but wanted to check in case my search-fu was weak and I had missed something...