Hi there, I'm hoping someone can help me - I'm having difficulty installing a new drive into my mk 2 empeg.
It currently has an original 18Gb disk and an aftermarket 20Gb disk, and I'm trying to replace them both with a single 80Gb disk.
Unfortunately, the builder ram image seems to be unable to format the new drive - I have tried it on the first and second IDE connector, with each of the master/slave/CS settings (it only boots with CS), etc. The disk is a Fujitsu MHT2080AT.
Here is a log of the unit's output booting with the new drive, and the builder image (captured via hyperterminal):
empeg-car bootstrap v1.00 20000601 (
[email protected])
If there is anyone present who wants to upgrade the flash, let them
speak now,
or forever hold their peace...it seems not. Let
e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting
the kerne
l.
Linux version 2.2.14-rmk5-np17-empeg49 (
[email protected])
(gcc versi
on 2.95.3 20010315 (release)) #130 Mon Oct 22 18:52:07 BST 2001
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 7, serial number 80000279)
Command line: mem=12m
Calibrating delay loop... 207.67 B
Memory: 10968k/12M available (964k code, 20k reserved, 332k data, 4k
init)s.cpp 18
IP Protocols: ICMP, UDP, TCPd=5
Dentry hash table entries: 2048 (order 2, 16k)hash 16384 bhash
16384)econds
Buffer cache hash table entries: 16384 (order 4, 64k)
IrDA (tm) Protocols for Linux-2.2 (Dag Br
Page cache hash table entries: 4096 (order 2, 16k)
Stressi
Linux-IrDA: IrCOMM protocol ( re
POSIX conformance testing by UNIFIXs.cpp 189 ( 14): Poll result=0
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
ircomm_tty: virtual tty driver for IrCOMM ( re
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
hdstress.cp
TCP: Hash tables configured (ehash 16384 bhash 16384)
Starting kswapd v 1
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)serial driver version
4.27
empeg audi
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
hda: FUJI
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UARTsed.
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
empeg usb initialised, PDIUSBD12 id 1012
Signature is ffffffff 'ÿÿÿÿ'
hda: FUJITSU MHT208
empeg display initialised.
empeg dsp audio initialisedalised 0089/88c1 (save to d
empeg dsp mixer initialised
empeg dsp initialisedflash driver
hdb: FUJITSU MHT2080AT, ATA DISK drive 320 bl
RAM disk driver initialized: 16 RAM disks of 4096K size
hdb: FU
empeg single channel IDE drive
Probing primary interface...warn
hdb: FUJITS
hda: FUJITSU MHT2080AT, ATA DISK driveed
hda: FUJITSU MHT2080AT, ATA DISK driverupt, status=0xff, count=1unted
root (
hda: FUJITSU MHT2080AT, ATA DISK drive
hda: FUJITSU MHT2080AT, 76319MB w/8192kB Cache, CHS=9729/255/63nmount
old root ...
empeg-flash driver initialized) at 0x4008000 IRQ:7 INTF:TP M
smc chip id/revision 0x33491
smc9194.c:v0.12 03/06/96 by Erik Stahlman (
[email protected])ounting first
music partition
SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC
00:02:d7:10:01:1
hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4
7
Partition check:
VFS: Can't
hda: hda1 < hda5 hda6 > hda2 hda3 hda4ISK: ext2 filesystem found at
block 0
RAMDISK: ext2 filesystem found at block 0
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...(ext2 filesystem) readonly.
change_root: old root has d_count=1
to unmount old root ... okay
Freeing unused kernel memory: 4k initVFS: Can't find an ext2 filesystem
on dev i
de0(3,4).
mount: wrong fs type, bad option, bad superblock on /dev/hda4,
or too many mounted file systems
warning: can't open /etc/mtab: No such file or directory
umount: /drive0: not mounted
Making first drive...
mke2fs 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining
whether /dev/
hda4 is mounted.
no room for private writable mapping
error: -12
/dev/hda4: Memory allocation failed while setting up superblock
hdstress.cpp 189 ( 14): Poll result=0 on fd=5
hdstress.cpp 189 ( 14): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp 189 ( 14): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
Thanks for any information,
Matt
Previous Topic
Index
