In reply to:

I'd wanna see an example and a cost estimate... but i'm interested...



I'll get pictures when there is something to take pictures of. Cost won't be determined until I do a test run, but it won't be cheap. This is a very time consuming finish to do right. It will take around 7-8 coats to build up sufficient thickness in the finish since lacquers generally have a low solids to solvent ratio. Before it can be rubbed out, it has to harden for at least a week. I don't have a docking station to "practice" on, but have plenty of scrap MDF like what the station is made of.

I will give it a try in black this weekend and see how the initial spraying goes.

Stu
_________________________
If you want it to break, buy Sony!