empeg:/drive0/var# ./smartctl -l error /dev/hda
smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 2

ATA Error Count: 0
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in standby mode.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  a2 00 86 b6 e2 51 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  df 20 84 b4 e0 20 70 10  43d+09:17:39.225  MEDIA UNLOCK
  df 00 84 b4 e0 20 70 10  43d+09:17:39.225  MEDIA UNLOCK
  df e0 81 b4 e0 20 70 10  43d+09:17:39.225  MEDIA UNLOCK
  df c0 81 b4 e0 20 70 10  43d+09:17:39.225  MEDIA UNLOCK
  df a0 81 b4 e0 20 70 10  43d+09:17:39.225  MEDIA UNLOCK

Error -1 occurred at disk power-on lifetime: 719 hours (29 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 59 82 f2 7e bb e3  Error: IDNF at LBA = 0x03bb7ef2 = 62619378

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c4 00 08 22 1b 02 e0 00  38d+05:30:19.500  READ MULTIPLE
  c4 00 08 1a 1b 02 e0 00  38d+05:30:19.500  READ MULTIPLE
  c4 00 08 12 1b 02 e0 00  38d+05:30:19.500  READ MULTIPLE
  c4 00 08 0a 1b 02 e0 00  38d+05:30:19.500  READ MULTIPLE
  c4 00 08 02 1b 02 e0 00  38d+05:30:19.500  READ MULTIPLE

Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  00 00 00 00 00 00 00  

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------

empeg:/drive0/var#