Hi,

Make sure the WD 250GB drive is strapped correctly (you only have strapped, right).

I have recently been working with the exact configuration - I have a lot of them with 2 each 250GB drive configurations.

I have the left drive (end drive with the strap - it goes vertical down the pins, not across the pins by the way), the right drive is without a strap.

You must have one strapped and one not. You can't have 2 drives strapped or 2 drives with no strap.

Before adding tunes read the current thread entitled "250GB Drives" in the General section of the List Forum.

Ross
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.