Hi guys

I have got the display running againg after changing two fuses on the motherboard (thank you StigOE). However, the buttons and remote control does not work.

I have checked the flat cable and all connections. It should work. What else could have been broken when I connected the display connector (on the display board it self) the wrong way?

One thing Stig discovered when changing the fuses was a resistor that looked like it was cut of. We tried to solder it on, but it made no difference. It's the one with red stripes just by the IDE connector on the picture.

Any clues to the button problem, and/or the resistor question?