Originally Posted By: K447
What are you using to power that amplifier?

200+ watts DC is a fair amount of current.


Thankfully only a few watts are needed to fill a room with sound!
We're using a 12VDC brick that can supply it with up to 3.3 amps,
so good for perhaps 15-18 watts per channel as is.

EDIT: I originally tried to run the empeg from the same brick
at the same time, but it backfed too much noise to the amplifier that way.
So instead, there are now two 12VDC bricks behind the loudspeaker. smile


Edited by mlord (20/02/2017 16:00)