Ok, here's the bootlog on home power.
###############################

empeg-car v0.07 19991106 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.03
Copying kernel...
Calling linux kernel...
Uncompressing Linux....................... done, booting the kernel.
Linux version 2.2.14-rmk5-np17-empeg43 (root@linux) (gcc version 2.95.2 19991024
(release)) #1 Wed Jul 18 20:20:45 MDT 2001
Processor: Intel StrongARM-1100 revision 9
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 4, serial number 00317)
Command line: mem=8m temp=27
Calibrating delay loop... 207.67 BogoMIPS
Memory: 7356k/8M available (580k code, 20k reserved, 228k data, 8k init)
Dentry hash table entries: 1024 (order 1, 8k)
Buffer cache hash table entries: 8192 (order 3, 32k)
Page cache hash table entries: 2048 (order 1, 8k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 67706d65 'empg'
Scheduling custom logo.
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg remote control/panel button support initialised (Using FIQs).
A25D0A->B94614 10640650->12142100
A25D0B->B94615 10640651->12142101
A25D43->B9460B 10640707->12142091
A25D42->B9460A 10640706->12142090
A25D12->B9465E 10640658->12142174
A25D1A->B9461F 10640666->12142111
A25D0C->B9460E 10640652->12142094
A25D40->B9461B 10640704->12142107
A25D41->B9460F 10640705->12142095
A25D19->B94603 10640665->12142083
A25D0D->B94600 10640653->12142080
empeg usb initialised, USBN9602 revision 1
empeg state support initialised 0089/8893 (save to d0005680).
empeg RDS driver initialised
empeg power state driver initialised
Linux video capture interface: v1.00
empeg FM radio driver (Philips).
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg dual channel IDE
Probing primary interface...
No drives found, retrying...
No drives found, retrying...
No drives found, retrying...
No drives found, retrying...
No drives found, retrying...
hda: TOSHIBA MK1011GAV, ATA DISK drive
hdc: TOSHIBA MK1011GAV, ATA DISK drive
Registering drives...
ide0 at 0x040-0x047,0x078 on irq 7
ide1 at 0x000-0x007,0x038 on irq 6
hda: TOSHIBA MK1011GAV, 9590MB w/0kB Cache, CHS=19485/16/63
hdc: TOSHIBA MK1011GAV, 9590MB w/0kB Cache, CHS=19485/16/63
empeg-flash driver initialized
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
hdc: hdc1 hdc2 hdc3 hdc4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 8k initI see this is a developer image!
Mounting proc
Mounting first music partition
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
empeg-car 1.03-rc1.

Veiko
[email protected]

MK1 #317 - 20GB green