I also asked if it'd be a 10/100baseT(x) autosensing port and was told that the ARM's bus limitations would restrict the ethernet speeds to 10baseT.

It'd be great if it was autosensing. I've standardised on 100Mbps at home now, which would mean an extra hub (or an autosensing one) just for the empeg which is a bit of an extravagence (although not completely unlikely )

Even if it worked at 10mbs on a 100mbs link - that'd be fine.

Paul.

Paul Haigh, 6GB, Blue
Reg: 4120 - Serial 00254