These are user interface comments and suggestions, and are in no particular order. And, I'm not sure who controls what is discussed so I included the Empeg team and Mark.

1. When the volume is "locked" can cannot be changed, don't pop up the volume adjustment display. I have a kenwood head in the truck and wanted the remote to change the volume on the kenwood, not the empeg. No need to display a bar that cannot change on the empeg.

2. The number (1) on the remote cycles through different time frames when you press it. the suggestion is to only rotate to the next type of display if the current display is active. I run with the visuals in transient mode, and sometimes want to just pop the current time on. I have to hit the (1) button a bunch of times to get to the clock. What I want is to not have the (1) button display *and* rotate, but just display. If is is currently on screen and (1) is pressed again, then rotate *and* display. This way, at any time, I can press (1) and see the clock momentarily.

3. The above rotate scenario would also be welcome on the menu key that changes display modes. While in Transient Visuals mode, pressing the Menu should show the current song and slide away. If the song is displayed, then rotate to the next display mode.

No replies necessary. Just trying to help.

Cheers!

John