Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#117193 - 20/09/2002 18:45 Ethernet Problem
jets
enthusiast

Registered: 08/07/2002
Posts: 237
Loc: Toronto, Canada
i have been using ethernet for a long time now and all of a sudden, connecting to the player through ethernet is not working.

i have 2 ethernet cards on my PC and i use one to connect to the cable router for internet, file sharing, and all that. the second is obliously for the empeg. so the card i use for the empeg has an ip of lets say 192.168.123.137 with a subnet mask of 255.255.255.0. now i set the empeg at 192.168.123.138 with the same subnet mask and she won't connect. after i checked the about screen on the empeg i have found that the subnet on the player is 255.255.255.255? i thought that was strange so i double-checked and found that it's set correctly in the config.ini file as well as in the networking tab in emplode. this is excruciating since the serial connection takes forever everytime i try something different.

any ideas?

-TIA
_________________________
It seemed like a good idea at the time.

Top
#117194 - 20/09/2002 18:52 Re: Ethernet Problem [Re: jets]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31594
Loc: Seattle, WA
Did you, by any chance, install the Mark 1 version of the player software onto it?
_________________________
Tony Fabris

Top
#117195 - 20/09/2002 21:53 Re: Ethernet Problem [Re: tfabris]
jets
enthusiast

Registered: 08/07/2002
Posts: 237
Loc: Toronto, Canada
no, the last update was car2-developer-v2.00-beta13.upgrade
_________________________
It seemed like a good idea at the time.

Top
#117196 - 21/09/2002 08:59 Re: Ethernet Problem [Re: jets]
jets
enthusiast

Registered: 08/07/2002
Posts: 237
Loc: Toronto, Canada
had to uninstall the card and re-assign a new "private" ip address.
_________________________
It seemed like a good idea at the time.

Top