Bigdisk builder gets stuck on "Selecting pump device" on 120G Samsung | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » Bigdisk builder gets stuck on "Selecting pump device" on 120G Samsung

Topic Options

#296366 - 04/04/2007 13:37 Bigdisk builder gets stuck on "Selecting pump device" on 120G Samsung
julf veteran Registered: 01/10/2001 Posts: 1307 Loc: Amsterdam, The Netherlands	Trying to add a 120G disk, I am trying to run the "Mark Lord Special Disk Builder" (builder_bigdisk.upgrade), it gets to "Selecting pump device" but then nothing further happens. The disk is a 120G Samsung, connected as the main and only disk. Any hints/suggestions?
Top

#296367 - 04/04/2007 13:55 Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams [Re: julf]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14484 Loc: Canada	Mmm.. I've never actually used the builders myself, or at least not on any drive over 30GB. They reportedly do work, though. So I wonder what's strange in this case. Master/slave jumper? Any chance of a serial port capture (log) ? ??
Top

#296368 - 04/04/2007 15:27 Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Samsung [Re: julf]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31578 Loc: Seattle, WA	I get a 'pump' error when I try to upgrade my player firmware. _________________________ Tony Fabris
Top

#296369 - 04/04/2007 15:28 Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams [Re: mlord]
julf veteran Registered: 01/10/2001 Posts: 1307 Loc: Amsterdam, The Netherlands	Found the problem - the classic bent IDE header on main board Guess what I have to do is switch over the display board and the disks from this one to the spare unit (that has a failing rotary encoder). Are the display boards of MK II:s and Rio's interchangeable?
Top

#296370 - 04/04/2007 15:39 Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams [Re: julf]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14484 Loc: Canada	Quote: Found the problem - the classic bent IDE header on main board Guess what I have to do is switch over the display board and the disks from this one to the spare unit (that has a failing rotary encoder). Are the display boards of MK II:s and Rio's interchangeable? Yes, quite interchangeable. -ml
Top

#296371 - 04/04/2007 16:20 Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams [Re: julf]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31578 Loc: Seattle, WA	Quote: Are the display boards of MK II:s and Rio's interchangeable? As long as you remember that the knob is different for the Mk2 encoder shaft and the Rio Car enoder shaft. _________________________ Tony Fabris
Top

#296372 - 04/04/2007 16:25 Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams [Re: tfabris]
julf veteran Registered: 01/10/2001 Posts: 1307 Loc: Amsterdam, The Netherlands	Ahh, good point, thanks!
Top

View All Topics