err: stat_timo | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » err: stat_timo

Topic Options

#296639 - 09/04/2007 13:46 err: stat_timo
julf veteran Registered: 01/10/2001 Posts: 1307 Loc: Amsterdam, The Netherlands	Hmm... I keep getting error messages on the console semi-regularily, with the following content: hda: stat_timo: status=0xd0 show_message("000.0 hda: err: stat_timo") hda: no DRQ after issuing WRITE ide0: reset: success I assume it is an IDE bus timeout, but should I be worried or not?
Top

#296640 - 09/04/2007 15:24 Re: err: stat_timo [Re: julf]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14484 Loc: Canada	Quote: Hmm... I keep getting error messages on the console semi-regularily, with the following content: hda: stat_timo: status=0xd0 show_message("000.0 hda: err: stat_timo") hda: no DRQ after issuing WRITE ide0: reset: success I assume it is an IDE bus timeout, but should I be worried or not? Yes, be worried. Possible IDE cable or header issue. Cheers
Top

#296641 - 09/04/2007 17:00 Re: err: stat_timo [Re: mlord]
julf veteran Registered: 01/10/2001 Posts: 1307 Loc: Amsterdam, The Netherlands	Quote: Yes, be worried. Possible IDE cable or header issue. As I feared. OK, will investigate. Thanks!
Top

View All Topics