#333896 - 10/06/2010 12:30
A little cutie for my office- Microbot Alpha
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Someone plopped one of these in my office yesterday afternoon. It's just the arm, though- no pendants or controller. The drive amps seem to be built into the base. If I can't get the rest of the system from where ever this one came from, I wonder if I could patch something together... I've already had the wrist apart and repaired the gripper. The thing is a watchwork of cables and pulleys. Here's some info from the still existing manufacturer- http://www.microbotzone.com/Home/tabid/3629/Default.aspxPhoto (above) is hotlinked from this guy's site- http://www.dvq.com/misc/html/eframe.htm(click 'Robot' in the top frame to see other photos)
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#333974 - 11/06/2010 16:12
Re: A little cutie for my office- Microbot Alpha
[Re: tfabris]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Hmm... House, not so much. Most of the collection is at the office. "The collection" is 90% wind-up toys and the like. This tyke is a departure- and closely related to my big boys on the shop floor.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#334133 - 15/06/2010 20:18
Re: A little cutie for my office- Microbot Alpha
[Re: Robotic]
|
old hand
Registered: 01/10/2002
Posts: 1038
Loc: Fullerton, Calif.
|
I've never seen one before...
I've wanted it all my life, I now realize.
|
Top
|
|
|
|
#334136 - 15/06/2010 21:06
Re: A little cutie for my office- Microbot Alpha
[Re: larry818]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Heehee I know what you mean! I'd never heard of them before, either. It seems that they were meant for education use, but found a good niche in medical sample handling. I think the arm I got came from the garage of an engineer who integrated them for such lab uses. It looks doubtful that I'll get to complete the kit from that source. Next step is to contact the manufacturer and see what they can provide. I looked on eBay a little, but didn't find anything at all.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#334138 - 15/06/2010 21:10
Re: A little cutie for my office- Microbot Alpha
[Re: Robotic]
|
carpal tunnel
Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
|
Any repairs or renovations clearly need to involve Legos. Or perhaps some Erector/Meccano.
_________________________
Bitt Faulk
|
Top
|
|
|
|
#334139 - 15/06/2010 21:44
Re: A little cutie for my office- Microbot Alpha
[Re: wfaulk]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Lego is doing some really mind-bending things with their robot kits. Very advanced stuff. I do enough programming at work, though. As for Erector sets- check this stuff out- http://8020.net/We use a fair bit of it at work for quick fixture prototypes.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#334154 - 16/06/2010 02:46
Re: A little cutie for my office- Microbot Alpha
[Re: Phoenix42]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Lego or Legos? I had to check. http://en.wikipedia.org/wiki/LegoSorry if I missed a joke.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#334156 - 16/06/2010 10:20
Re: A little cutie for my office- Microbot Alpha
[Re: Robotic]
|
carpal tunnel
Registered: 23/09/2000
Posts: 3608
Loc: Minnetonka, MN
|
If the LEGO trademark is used at all, it should always be used as an adjective, not as a noun. For example, say "MODELS BUILT OF LEGO BRICKS". Never say "MODELS BUILT OF LEGOs" http://www.lego.com/eng/info/fairplay.asp
_________________________
Matt
|
Top
|
|
|
|
#334157 - 16/06/2010 10:27
Re: A little cutie for my office- Microbot Alpha
[Re: msaeger]
|
carpal tunnel
Registered: 08/03/2000
Posts: 12338
Loc: Sterling, VA
|
Wow, a corporate policy to dictate your sentence structure. That's a new one on me.
I'm not sure which I prefer. I think both ways sound okay to me.
_________________________
Matt
|
Top
|
|
|
|
#334161 - 16/06/2010 11:08
Re: A little cutie for my office- Microbot Alpha
[Re: Dignan]
|
carpal tunnel
Registered: 13/07/2000
Posts: 4180
Loc: Cambridge, England
|
I'm not sure which I prefer. I think both ways sound okay to me. It's a common cause of Internet flame-wars, because in the UK "Lego" is used as an unpluralisable mass noun: "houses made of Lego" like "houses made of wood". In the US, to a large but not invariable extent, Lego is used as a common noun for a single piece: "houses made of Legos" like "houses made of logs". On reaching the official Internet flamewar age of about 15, most people have not yet encountered the other camp's usage, and so maintain that theirs is "correct" despite Lego not being invented in English in the first place (and in fact being a bilingual pun in Latin and Danish). Peter
|
Top
|
|
|
|
#334169 - 16/06/2010 15:57
Re: A little cutie for my office- Microbot Alpha
[Re: peter]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Perhaps a more apt comparison is to the word 'brick', since that is what Lego manufactures.
In my experience (US), the usage can go either way. A house built of bricks (multiple building blocks) or built of brick (general building material).
Ok- now that I've written it out it seems a silly point to make. Bricks, logs, blocks, plenty of options all with the same "rules".
Ah well, hooray for variety! It's the differences that make life interesting.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#334177 - 16/06/2010 18:19
Re: A little cutie for my office- Microbot Alpha
[Re: Robotic]
|
old hand
Registered: 01/10/2002
Posts: 1038
Loc: Fullerton, Calif.
|
|
Top
|
|
|
|
#334379 - 23/06/2010 16:38
Re: A little cutie for my office- Microbot Alpha
[Re: Dignan]
|
carpal tunnel
Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
|
Wow, a corporate policy to dictate your sentence structure. That's a new one on me. It's not uncommon. Lego is a trademark -- not having a policy on usage could result in losing the trademark protection.
|
Top
|
|
|
|
#335570 - 29/07/2010 00:46
Re: A little cutie for my office- Microbot Alpha
[Re: Robotic]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
I looked on eBay a little, but didn't find anything at all. Ah- Searches for "Microbot Alpha" didn't lead me anywhere. I've found that the word "Teachmover" gets loads more results. I managed to find a manual, at least.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#335627 - 29/07/2010 19:53
Re: A little cutie for my office- Microbot Alpha
[Re: Robotic]
|
carpal tunnel
Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
|
I was in Maplin's this weekend and saw this. Although the only reason I bought it was because it's a kit. I'm saving it for once we've finished moving offices and I'm back to struggling to fill the days again....
_________________________
Cheers,
Andy M
|
Top
|
|
|
|
#335629 - 29/07/2010 20:36
Re: A little cutie for my office- Microbot Alpha
[Re: andym]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Sweet! looks very similar to some kits I had my eye on a few years ago from http://www.lynxmotion.com/c-27-robotic-arms.aspxA complete USB interface is probably the best way to go!
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#335630 - 29/07/2010 20:39
Re: A little cutie for my office- Microbot Alpha
[Re: andym]
|
carpal tunnel
Registered: 24/12/2001
Posts: 5528
|
I was in Maplin's this weekend and saw this. Although the only reason I bought it was because it's a kit. I'm saving it for once we've finished moving offices and I'm back to struggling to fill the days again.... Looks quite neat as a kit to play with. I had a cheapo kit robot arm years ago and whilst it wasn't actually that useful to do anything with, it was enjoyable to build. Looks like it is a OWI Robot Arm but with USB instead of a control panel. There are a series of videos on YouTube with somebody assembling one. From what I can tell, the arm uses regular motors instead of servos and there isn't any feedback like optical encoders so you don't know the exact positioning of the arm. Also the drivers are unsigned so you might have issues with it.
|
Top
|
|
|
|
#335653 - 30/07/2010 07:29
Re: A little cutie for my office- Microbot Alpha
[Re: tman]
|
carpal tunnel
Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
|
Yes, I think the chances of doing any industrial automation with it are slim. But it seemed like a cool toy, and like most things I buy, I'll enjoy the building far more than the actual playing around. A crate full of built but unused Velleman kits are testament to that.
I also like the idea of learning a bit more about driver writing by making a linux USB driver for it.
_________________________
Cheers,
Andy M
|
Top
|
|
|
|
|
|