empeg-car bootstrap v1.02 20001106 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerne
l.
Linux version 2.2.14-rmk5-np17-empeg51 (mac@aphex) (gcc version 2.95.3 20010315
(release)) #16 Wed Jul 24 18:19:54 BST 2002
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 30102349)
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 206f6972 'rio '
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0004d00).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: IBM-DJSA-220, ATA DISK drive
hda: IBM-DJSA-220, ATA DISK drive
hda: IBM-DJSA-220, ATA DISK drive
hda: IBM-DJSA-220, ATA DISK drive
hda: IBM-DJSA-220, ATA DISK drive
hda: IBM-DJSA-220, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:09:2
d
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting
player
player.cpp : 385:empeg-car 2.00-beta13 2002/07/24.
q! tags.cpp : 61:Failed to open tags (0xc0041002).

Prolux 4 empeg car - 2.1434 Jul 24 2002
Vcb: 0x4086d000
serial_notify_thread.cpp: 116:@@ N29
serial_notify_thread.cpp: 117:@@ F0x990
serial_notify_thread.cpp: 118:@@ TLet Me See You Pop It
serial_notify_thread.cpp: 119:@@ AGet It Boyz
serial_notify_thread.cpp: 120:@@ G
serial_notify_thread.cpp: 116:@@ N29
serial_notify_thread.cpp: 117:@@ F0x990
serial_notify_thread.cpp: 118:@@ TLet Me See You Pop It
serial_notify_thread.cpp: 119:@@ AGet It Boyz
serial_notify_thread.cpp: 120:@@ G
serial_notify_thread.cpp: 180:@@ #0 0:02:28
serial_notify_thread.cpp: 170:@@ S0
serial_notify_thread.cpp: 180:@@ #990 0:02:29
serial_notify_thread.cpp: 180:@@ #990 0:02:30
q
serial_notify_thread.cpp: 180:@@ #990 0:02:31
serial_notify_thread.cpp: 180:@@ #990 0:02:32
serial_notify_thread.cpp: 180:@@ #990 0:02:33
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Player exited normally: 0
Switching to shell-player loop
Starting bash.
empeg:/empeg/bin# rw
empeg:/empeg/bin# rwm
empeg:/empeg/bin# rm/empeg/var/database
bash: rm/empeg/var/database: No such file or directory
empeg:/empeg/bin# rom
empeg:/empeg/bin# ro
empeg:/empeg/bin# exit
logout
Shell exit
Starting player
player.cpp : 385:empeg-car 2.00-beta13 2002/07/24.
! tags.cpp : 61:Failed to open tags (0xc0041002).
Prolux 4 empeg car - 2.1434 Jul 24 2002
Vcb: 0x4086d000
serial_notify_thread.cpp: 116:@@ N29
serial_notify_thread.cpp: 117:@@ F0x990
serial_notify_thread.cpp: 118:@@ TLet Me See You Pop It
serial_notify_thread.cpp: 119:@@ AGet It Boyz
serial_notify_thread.cpp: 120:@@ G
serial_notify_thread.cpp: 116:@@ N29
serial_notify_thread.cpp: 117:@@ F0x990
serial_notify_thread.cpp: 118:@@ TLet Me See You Pop It
serial_notify_thread.cpp: 119:@@ AGet It Boyz
serial_notify_thread.cpp: 120:@@ G
serial_notify_thread.cpp: 180:@@ #990 0:02:33
serial_notify_thread.cpp: 170:@@ S1
serial_notify_thread.cpp: 180:@@ #990 0:02:34
serial_notify_thread.cpp: 180:@@ #990 0:02:35
serial_notify_thread.cpp: 180:@@ #990 0:02:36
serial_notify_thread.cpp: 180:@@ #990 0:02:37
serial_notify_thread.cpp: 180:@@ #990 0:02:38
serial_notify_thread.cpp: 180:@@ #990 0:02:39
serial_notify_thread.cpp: 180:@@ #990 0:02:40
serial_notify_thread.cpp: 180:@@ #990 0:02:41
serial_notify_thread.cpp: 180:@@ #990 0:02:42
serial_notify_thread.cpp: 180:@@ #990 0:02:43
serial_notify_thread.cpp: 180:@@ #990 0:02:44
serial_notify_thread.cpp: 180:@@ #990 0:02:45
serial_notify_thread.cpp: 180:@@ #990 0:02:46
serial_notify_thread.cpp: 180:@@ #990 0:02:47
serial_notify_thread.cpp: 180:@@ #990 0:02:48

Again it stops responding. Is the line rm /empeg/var/database correct. That looks like it is running into a problem there. Also, it seens to be exepting comands fine in the shell. I let it sit for a while, in the shell, and then entered the same comands again and it responded fine. Hope this is a good thing.