How do I change a constant 12V signal to a pulse? | Technical / Troubleshooting

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » How do I change a constant 12V signal to a pulse?

Topic Options

#142461 - 11/02/2003 12:10 Re: How do I change a constant 12V signal to a pul [Re: wfaulk]
rtundo addict Registered: 27/02/2001 Posts: 569 Loc: Albany, NY	The empeg is set up as an auxillary device playing through the stock headunit. Muting the empeg therefore does not mute the stock headunit. I wanted to see if I can mute/unmute the headunit the same way as the steering wheel controls using the correct resistance.
Top

Entire topic
Subject	Posted by	Posted
How do I change a constant 12V signal to a pulse?	rtundo	11/02/2003 06:43
Re: How do I change a constant 12V signal to a pul	genixia	11/02/2003 11:54
Re: How do I change a constant 12V signal to a pul	rtundo	11/02/2003 12:01
Re: How do I change a constant 12V signal to a pul	rtundo	11/02/2003 12:02
Re: How do I change a constant 12V signal to a pul	wfaulk	11/02/2003 12:05
Re: How do I change a constant 12V signal to a pul	rtundo	11/02/2003 12:10
Re: How do I change a constant 12V signal to a pul	genixia	11/02/2003 12:53
Re: How do I change a constant 12V signal to a pul	jaharkes	11/02/2003 13:37
Re: How do I change a constant 12V signal to a pul	rtundo	11/02/2003 13:45
Re: How do I change a constant 12V signal to a pul	genixia	11/02/2003 13:47
Re: How do I change a constant 12V signal to a pul	tman	11/02/2003 13:55
Re: How do I change a constant 12V signal to a pul	rtundo	11/02/2003 13:58
Re: How do I change a constant 12V signal to a pul	thinfourth2	12/02/2003 04:04
Re: How do I change a constant 12V signal to a pul	rtundo	12/02/2003 06:16
Re: How do I change a constant 12V signal to a pul	rtundo	11/02/2003 13:49