Hi Guys,
I just got a NMEA gps receiver from a buddy, I have serialport=/dev/ttyS0 under gpsapp, because i want to test this without having to go out to my car. I don't have notify=1, or anything else like that in my config.ini. The COM port setting for my gps device, are 4800-8-n-1 with Hardware flow control. But gpsapp still just sits waiting for data. I've checked the settings on the gps device, and the NMEA output is on. Any Ideas?

Edit: The Unit is hooked up to the back of the empegs com port, with force ac/dc toggled to dc.