Well I don't have it here at the office but going from memory (which sometimes proves to be very flawed) I connected the unit directly to my computer, cofigured to infrastructure mode, changed the SSID to the SSID of my access point, turned on encryption and entered the ecryption code. Once I got it working with the computer I simply plugged it into the receiver.

Where I went wrong was in the area of SSID. When using two of the wavit11's together they seem to use the serial number of the unit instead of the ssid so when I switched to try and use the thing with my existing access point I did not enter the SSID and only entered the wep encryption.

Let me know if this is too confusing... if it is I'll give the exact steps when I get home tonight.