What an amazingly well done faq, Tony. As usual...

Aside from this, I did check it, since I knew that problem since you posted the faq, but until I saw the movie I did not realize I was misunderstanding it. I was thinking that the pin itself would slide out, while, if I understand it properly, it is the wires that slide out of the pins. Now, no pin slides out of the dock connector, I just checked; but I haven't checked if there is some wire not properly connected to its pin. I know for sure no wire came out while I moved or pulled them, even though gently, but it is still possible that some wire is still not properly connected, I would say.
So, I'll try this one as well.


As a side note, I have to say that this is driving me crazy. If at the end of it I have to buy another radio module, I am considering getting a different device to be coupled to the empeg. A Becker car setereo had excellent nav system as well. Look here: http://www.becker.de/beckerCC21/www_root/index.jsp?language=En thenCar Navigation, then TP HS Limited Edition, just as an example.
I mentioned Becker because afaik they have the best car radio systems available in the market. Just a thought, at the moment.