All clients are DHCP except the Empeg. The AP is hardcoded and the Router is also.

I'm not sure what's happening at this point. I'm guessing that the bridge is attempting to connect to the AP instead of the router because when I hook it up, it kills my internet connection.

As far as converting it to a bridge, I think I'm screwed. The documentation regarding bridges reads as follows:

Wireless Bridge - If you are trying to make a wireless connection between two wired networks, select Wireless Bridge. This mode connects two physically separated wired networks with two access points.
To configure a Wireless Bridge environment, click Wireless Bridge and enter the LAN MAC address of the remote access point in the Remote Bridge MAC Address field. The remote access point also needs to be set up as a Wireless Bridge.