Quote:
It should go to +12V as that is the same as amplifier remote.


To clarify, this is a MK2a and I am talking about the serial port on the back of the Empeg, not the one on the sled. A quick probe with the multimeter shows:
a) Voltage between docking connector pins 2 and 13 reads 11.1V (this is on a 12V PSU)
b) Definitely no continuity between docking connector pin 2 and Empeg on-board serial connector pin 4 [edit:corrected] - which is what I would expect from other posts on this BBS.

I do only have one Empeg - it is entirely possible that my Empeg doesn't work the way it should - but much more likely it is just something I don't understand.


Edited by mdavey (11/10/2004 14:51)
_________________________
Michael
Ex-owner of stolen empeg #030102741