MY SERIAL LOG:

empeg-car bootstrap v1.02 20001106 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the k
l.a:
Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315
smc chip id/re
(release)) #11 Tue Apr 1 18:49:59 BST 2003

empeg-car bootstrap v1.0
Processor: Intel StrongARM-1100 revision 11ATUS(0xa1) instead of ALTSTATUS(0xff): 16
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 10101588)re is anyone present who wants
Command line: mem=16m STATUS(0xa1)
Calibrating delay loop... 207.67 BogoMIPSTATUS(0xa1) instead of ALTSTATUS(0xff)
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)tel StrongARM-1100 revision 11ISith STATUS(0xa1) instead of ALTSTATUS(0xff
Dentry hash table entries: 2048 (order 2, 16k)
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
hdb: pr

e000 v1.04grade th
NET4: Linux TCP/IP 1.0 for NET4.0
Cop(0x
IP Protocols: ICMP, UDP, TCP = 0xa1)i
TCP: Hash tables configured (ehash 16384 bhash 16384)ng with STATUS(0xa1) instead of ALTSTATUS(0xff)ctabl
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
hda: probing with STATUS(0xa1) in
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 ).2.14-rmk5-np17-empeg52 (rob@aphex)sed RAM disks of
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 2
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
hdb: probing with STATUS(0xa1) insteaRM-11
Signature is 67706d65 'empg'instead of
Scheduling custom logo.
empeg display initialised.: virtu
h
empeg dsp audio initialised) instead of ALTSTATUS(0xff
empeg dsp mixer initialisedc versi
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0TATUS(0xa1) instead of ALTSTATUS(0xff)ith STAT
empeg remote control/panel button initialised.
empeg display initiali
empeg usb initialised, PDIUSBD12
4o
Partition check:i
empeg single channel IDEtus = 0xa1)error: status
Probing primary interface...
emp
hda: probing with STATUS(0x01) instead of ALTSTATUS(0xff)xa1)is a SA1100 UART no response (status = 0xa1)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
TCP: Hash tablb: probing wit
hda: no response (status = 0xa1)S(0xa1) insteaff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)disks of STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)

hda: no response (status = 0xa1) revision a0on 4.27 withSTATUS(0
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: p
hda: probing with STATUS(0xa1
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)eg state support initiali1)
hdb: no response (status = 0xa1)of ALTSTATUS(0xff)ersion=01)0300
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
smc chip id/revision 0x3349
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)f ALTSTATUS(0xff)ith STATUS(0x00) instead of
hda: no response (status = 0xa1)
hdb: probing with STATUS(0xa1) instea0800
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)

hda: no response (status = 0xa1
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0x
hdb: no response (status = 0xa1)yone present who wants to upgrad
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff) of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
e000 v1.04
Copying ke
hdb: no response (status = 0xa1)obing with STATUS(0xa1) instead
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)..... done, booti
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1)
hda: no response (status = 0xa1) id/revision 0x3349998 Corel Com
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
smc9194.c:v0.12 03/06/96 by Erik Stahlman (eri
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
empeg-car player (hardware revision 9, ser
hdb: no response (status = 0xa1)

SMC9194: SMC91C94(r:9) at 0x4
hda: probing with STATUS(0xa1) instea

NET4: Linux TCP/IP
I
hda: no response (status = 0xa1)ts to upgrade the flash, let the
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
i
TCP: Hash tables conf
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)

hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff) { Dri
hdb: no response (status = 0xa1)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)(c) 1998 Corel Computer Corp.d TrackZero/16M available (9
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1)
Signature is 67
hdb: probing with STATUS(0xa1) instea
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
Command line: mem=16m dsp audio in
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)... 207.67 BogoMIPSreset: master: error (0x00?)ALTSTATUS(
hda: no response (status = 0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)de, 20k reserved, 372k data, 4k init)n
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)da: set_geometry_intr: status=0x51 { DriveReady SeekCompl
hdb: no response (status = 0xa1)

hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
TCP: Hash tables confi
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)S
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)rCOMM ( revision:Wed May 2: read_intr: status=0x51 { Dri
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
ttyS01 at 0xf8050000 (i
hda: no response (status = 0xa1)drMarkNotFound }, CHS=16128/15/8
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
ttyS02 at
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: set_geometry_intr: stat
hdb: no response (status = 0xa1)
Signature is 6
hda: probing with STATUS(0xa1) instea

hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
empeg dsp initialisedusError SectorIdNotFo
hdb: no response (status = 0xa1)empeg audio-in initialised, CS42
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
RAMDISK: ext2 filesyste
empeg
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)entries: 4096 (order 2, 16k)p
hda: no response (status = 0xa1)

hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
RAM disk driver initialized: 16 RAM disks of 4096
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
Based upon S
Calling linux kernel...er
hdb: no response (s
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda:
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
empeg
hda: no response (status = 0xa1)
hda: probing
hdb: probing with STATUS(0xa1) instea
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)ter Society NET3.039o wants to upgrade
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: no response (st
hdb: no response (status = 0xa1)

empeg power-p
Probing primary interface...th STATUS(0xa1) instead of A
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1) instead of

hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1)


hda: probing with STATU
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
empeg state support
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1
hdb: no response (status = 0xa1)
hda: probing with STATUS(0xa1) insteaLinux 2.2S
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no res
hdb: no response (status = 0xa1)

empeg powe
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff) ALTSTATUS(0xff) w/1874kB Cache, CHS=38760/16/63serial dr
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1) STATUS(0xa1) instead of ALTSTAT
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
ide0: reset
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff) initializedUS
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)1): status=0x51 { DriveReadylised.
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)h STATUS(0xa1) instead of ALTSTATUS(0xff)robing primary i
hdb: no response (status = 0xa1)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1)da:
hdb: no response (status
hdb: probing with STATUS(0xa1) instea

hda: no response (status = 0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
Starting kswapd
hda: probing
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)4 =serial driver versio
hdb: no response (status = 0xa1)
ide0
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)s = 0xa1)15 V0.94.1 (
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
riveR
hdb
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)99 ) protocol ( revision:Tue May 18 03:11:39 1999 )ad
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb:
hda: no response (status = 0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)of ALTSTATUS(0xff)bing
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)comm_tty: virtual tty driver for Ir
hdb: no response (status = 0xa1) STATUS(0xa1) instead of ALTSTAT
hda: probing with STATUS(0xa1) instea
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATU
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
lM
SA1100 serial driver version 4.27
hdb: no response (status = 0xa1)
hdb
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
SA1100 serial d
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff))h STATUS(0xa1)
hda: no response (status = 0xa1): probing with ST
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)US(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff) response (status = 0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: no response
hda: probing wit
hdb: no response (status = 0xa1)US(0xff)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)(0xa1) instead of
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)US(0xff).5: IrCOMM pro
hda: no response (status = 0xa1)
hda: no response (status = 0
hdb: probing with STATUS(0xa1) instea
SA1100 seri
hda: no response (status = 0xa1)ff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)) instead of ALTSTATUS(0xff)probing with STATUS(0xa1) ins
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: no response (status = 0xa1)ponse (status = 0xa1)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)TATUS(0xa1) instead of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)onse (sta
hdb: no response (s

hda: probing wit
hdb: no response (status = 0xa1)US(0xff)d of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: set
hda: no response (status
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probi
hda: no response (status = 0xa1)LTSTATUS(0xff)ff)780 r5
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xf
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTST
hdb: no response (status = 0xa1)
hdb: no response (status
hda: probing with STATUS(0xa1) instea
hda: probing with STATUS
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
h
hda: r
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: no response (status = 0xa1)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hda: no response (status = 0xa1)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0xff)
hdb: no response (status = 0xa1)
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:22:06:3
4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Cannot open root device 03:05
Kernel panic: VFS: Unable to mount root fs o



I've to say that the HD is perfectly working with another empeg.